MMA Adhesives
MMA adhesive cartridges, dispensing accessories and private-label options. Choose an adhesive by substrate and joint design, then check its technical data, cartridge format and handling requirements.
50 ml Solid Surface Adhesive
Two-part MMA adhesive in a 50 ml cartridge format for solid surface jointing enquiries. Select the adhesive grade and colour separately from the cartridge volume.
75 ml Solid Surface Adhesive
A 75 ml two-part MMA cartridge option for solid surface fabrication. Check the cartridge connection and dispensing arrangement before selecting mixers and applicators.
250 ml Solid Surface Adhesive
Two-part MMA adhesive in a 250 ml cartridge format for solid surface seaming. Cartridge capacity does not determine cure speed, colour match or bond performance.
Two-Part Solid Surface Joint Adhesive
Two-component adhesive enquiry for joints in specified solid-surface materials. Identify the sheet, joint design and colour reference before selecting an adhesive grade.
Adhesive Applicator Nozzles
Nozzles for controlling adhesive bead placement. Match the nozzle connection and geometry to the cartridge and any required static-mixing system.
Adhesive Dispensing Gun
Manual gun for dispensing compatible adhesive cartridges. Cartridge volume alone is insufficient to select a gun: barrel geometry, piston layout and mix ratio must also match.
Surface Preparation Cleaner
Cleaner or solvent enquiry for pre-bond surface preparation. The selected chemical must be compatible with both the substrate and the adhesive process.
Sanding & Polishing Kit
Abrasives, pads and polishing materials for finishing solid surface joints and faces. The sequence should match the sheet material and the specified final sheen.
Panel Bonding Adhesive
Adhesive enquiry for bonding panels to a backing or supporting component. Select the grade against the complete substrate pair and the service conditions.
Assembly Adhesive
Two-part adhesive enquiry for component assembly. Provide the substrates and production process so working time, fixturing and handling can be assessed together.
Adhesive for Heat-Exposed Assemblies
Adhesive-selection enquiry for joints exposed to elevated temperatures. A suitable grade cannot be identified from the words high temperature alone.
Gap-Filling Adhesive & Fillet Applications
Adhesive enquiry for joints with a defined gap or edge fillet. The permitted gap and cured properties must be established for the selected grade.
Private-Label Adhesive Cartridges
Private-label cartridge enquiry covering adhesive identification, label artwork and the retail or trade pack. Product and safety information need to remain traceable under the customer's branding.
Custom Adhesive Packaging
Packaging development for adhesive cartridges and related products. Define the sales unit, inner pack and shipping case before approving artwork and production quantities.
Adhesive Colour Matching
Colour-matching enquiry for a particular sheet and adhesive combination. Assess a cured trial joint against the actual sheet reference under the intended lighting.
Adhesive Application & Technical Support
Technical enquiry support for substrate selection, joint design and adhesive handling. The review starts with the materials, process and service conditions of the proposed assembly.